Mostrar el registro sencillo del ítem

dc.contributor.advisorCabanillas Quiroz, Guillermo Juan
dc.contributor.authorAlcas Andrade, Alexa Aymé
dc.contributor.authorLizarzaburu Silva, Carlos Gabriel
dc.creatorAlcas Andrade, Alexa Aymé
dc.date.accessioned2023-08-21T16:42:08Z
dc.date.available2023-08-21T16:42:08Z
dc.date.issued2023
dc.identifier.urihttps://hdl.handle.net/20.500.12759/11047
dc.description.abstractLa presente Tesis “Diseño y Modelamiento hidráulico de una bocatoma para mejorar el sistema de riego en el Centro Poblado – Buena Vista, Distrito de Chao, Virú 2021”, fue elaborada con el objetivo de brindar una solución técnica a la problemática presentada por la falta de caudal para riego de cultivos, debido a que no cuentan con una infraestructura adecuada para derivar el caudal necesario a las diferentes hectáreas en el centro poblado en mención. Actualmente, la Junta de usuarios del Sector Hidráulico Menor Chao cuenta con 17 usuarios en el Sector San Roberto, 13 usuarios en el Sector Luna Alto y de la provincia de Virú y departamento de La Libertad. Usuarios que cultivan productos como palta y maíz amarillo principalmente. Atendiendo a dicha realidad, la presente investigación se ha realizado en beneficio de la referida población tomando en cuenta la necesidad de una estructura hidráulica para obtener una parte del agua disponible en una corriente de agua (cauce del río), y darle un adecuado y eficiente uso. Aunado a lo anterior , se describe el procedimiento con el cual se realizó el diseño hidráulico, partiendo de las precipitaciones máximas anuales, información que se encuentra en las estaciones pluviométricas, claro está en el área de estudio; delimitando cuenca según la orografía hasta el punto de salida donde se ubica la infraestructura, para determinar nuestro tiempo de concentración para saber el tiempo necesario en que el agua por escorrentía llega hasta el punto definido y por último obtener nuestro caudal para diseñar la bocatoma, aplicando método de Creager según el T (período de retorno) y así dimensionar la Infraestructura acorde a las condiciones técnicas obteniendo una alternativa de solución que cubra las necesidades de la población actual y futura. Finalmente, luego de realizar el diseño hidráulico de la bocatoma, se procede a realizar la simulación hidráulica para determinar si cumple en el ancho del cauce con el caudal de máxima avenida según período de retorno, para posteriormente discutir los resultados obtenidos, y las acciones a tomar para beneficio de la población de la Junta de usuarios del Sector Hidráulico Menor Chaoes_PE
dc.description.abstractThe present thesis ““Design and hydraulic modeling of an intake to improve the irrigation system in the Populated Center - Buena Vista, District of Chao, Virú 2021““, was elaborated with the objective to provide a technical solution to the problems for the lack of flow for irrigation of crops, because they do not have correct infrastructure to derive the necessary flow to the different hectares in the zone. Currently, the Board of Users of the Minor Chao Hydraulic Sector has 17 users in the San Roberto Sector, 13 users in the Luna Alto Sector and province of Viru, in the departament of La Libertad. Users cultivate mostly avocado, vegetables and yellow corn. According to this reality, the present investigation, has been made for the benefit of the population, taking into account the need for a hydraulic structure to obtain part of the water available in a stream (river channel), and give it proper and efficient use. In addition, we describe the procedure of the hydraulic design, based on the maximum annual rainfall, information found in the pluviometric stations, of course, in the study area; delimiting the basin according to the orography to the exit point where the infrastructure is located, to determine our concentration time to know the necessary time in which the runoff water reaches the defined point and finally obtain our flow to design the intake, applying Creager method such as T (return period) and so dimension the Infrastructure according to the technical conditions obtaining an alternative solution that covers the needs of the current population and future. Finally, after of analyze the hydraulic design of the intake, proceeds with the hydraulic simulation to determine if it complies with the width of the channel with the maximum flood flow according to the return period, to lately discuss the results obtained, and the actions to be taken for the benefit of the population of the Board of Users of the Minor Chao Hydraulic Sector.en_US
dc.description.uriTesises_PE
dc.formatapplication/pdfes_PE
dc.language.isospaes_PE
dc.publisherUniversidad Privada Antenor Orregoes_PE
dc.relation.ispartofseriesT_CIVIL_2257
dc.rightsinfo:eu-repo/semantics/openAccesses_PE
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/es_PE
dc.sourceUniversidad Privada Antenor Orregoes_PE
dc.sourceRepositorio institucional - UPAOes_PE
dc.subjectBocatomaes_PE
dc.subjectInfraestructuraes_PE
dc.titleDiseño y modelamiento hidráulico de una bocatoma para mejorar el sistema de riego en el Centro Poblado - Buena Vista, Distrito de Chao, Virú 2021es_PE
dc.typeinfo:eu-repo/semantics/bachelorThesises_PE
thesis.degree.grantorUniversidad Privada Antenor Orrego. Facultad de Ingenieríaes_PE
thesis.degree.nameIngeniero Civiles_PE
thesis.degree.disciplineIngeniería Civiles_PE
dc.subject.ocdehttp://purl.org/pe-repo/ocde/ford#2.01.00es_PE
renati.advisor.orcidhttps://orcid.org/0000-0001-5006-2312es_PE
renati.author.dni71475007
renati.author.dni70496387
renati.advisor.dni17865283
renati.typehttp://purl.org/pe-repo/renati/type#tesises_PE
renati.levelhttp://purl.org/pe-repo/renati/level#tituloProfesionales_PE
renati.discipline732016es_PE
renati.jurorNarváez Aranda, Ricardo Andrés
renati.jurorRodríguez Ramos, Mamerto
renati.jurorSalazar Perales, Álvaro Fernando
dc.publisher.countryPEes_PE


Ficheros en el ítem

Thumbnail
Thumbnail
Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(es)

Mostrar el registro sencillo del ítem

info:eu-repo/semantics/openAccess
Excepto si se señala otra cosa, la licencia del ítem se describe como info:eu-repo/semantics/openAccess