Estudio de reducción del índice de rebote y evaluación del rendimiento de la mezcla fresca shotcrete en proyectos de espacios subterráneos
Ver/
Descargar
(application/pdf: 11.92Mb)
(application/pdf: 11.92Mb)
Fecha
2019Autor(es)
Reyes Rubio, Elvis Alexander
Metadatos
Mostrar el registro completo del ítemResumen
En este documento de investigación se estudió el fenómeno físico de la generación
del Rebote, una cantidad de porción de material de mezcla altamente pastosa de
cemento con fibras metálicas o sintética, que no adhiere en la cara de la superficie
del estrato rocoso de un túnel, mezcla que es colocado a alta presión de aire en la
operación del proyectado con el equipo robotizado para el Shotcrete.
Emplazado en el sitio de los trabajos del complejo sostenimiento mecanizado de
túneles y en contacto directo de los mismos por un periodo de tiempo de 2 años,
concebí en llevar a cabo, muestreo de este material Rebote.
Ejecutando el plan estratégico de muestreo donde se detallan desde la página 46.
Este material de muestreo representativo, se llevó a laboratorio de Control de
Calidad para ser analizado a través de ensayos granulométricos, encontrando
ciertos cambios de sus características de origen.
El análisis de ensayo nos dice que sufrió desplazamiento de la gradación de las
partículas del árido para el Shotcrete, se puede visualizar e interpretar a través de
su gráfico de la curva granulométrica y su módulo de finura. La arena inicial
compuesta en el Shotcrete se muestra con un módulo de finura del porcentaje
pasante un valor de 3.76, este al ser sometido a la operación del lanzado sufre el
cambio de su módulo de finura de 2.87, un valor menor que el árido de origen. Estos,
se detalla en el Capítulo de resultados.
El complejo sostenimiento mecanizado de túneles, debido al íntegro y
combinaciones de sus demás elementos como Operacionales, Productivo y
Controles de Ingeniería, se requirió de igual importancia examinar en simultaneo el
comportamiento físico y mecánico estos mismos elementos, para pretender el
entero conocimiento y se detallan en el desarrollo de esta tesis.
Entre los temas relevantes abordados son la técnica de lanzado del Operador, el
equipo robotizado autónomo de suministro de aire a presión y de los conjuntos de
los procedimientos técnicos de controles de calidad del Shotcrete, con ensayos
previos en laboratorio de sus materiales componentes, así como sus ensayos en
estado fresco y estado endurecido del Shotcrete.
La elaboración de esta, se siguieron recomendaciones de documentos normativos
de prácticas y métodos internacionales de construcción de espacios subterráneos,
Normas Europeas, Americana y Australiana; EN, EFNARC, ACI, ASA y ASTM. In this research document the physical phenomenon of the Rebound generation
was studied, an amount of highly grainy cement material mix with metallic or
synthetic fibers, which does not adhere to the surface of the rock stratum surface
of a tunnel, mixture that is placed at high air pressure in the operation of the
projected with the robotic equipment for the Shotcrete.
Located on the site of the works of the complex mechanized maintenance of
tunnels and in direct contact of the same for a period of 2 years, I conceived in
carrying out, sampling of this material Rebound.
Executing the strategic sampling plan where detailed from page 46.
This representative sampling material was taken to the Quality Control laboratory
to be analyzed through granulometric tests, finding certain changes in its
characteristics of origin.
The test analysis tells us that it suffered displacement of the gradation of the
aggregate particles for the Shotcrete, it can be visualized and interpreted through
its graph of the granulometric curve and its modulus of fineness. The initial
aggregate composed in the Shotcrete is shown with a modulus of fineness of the
passing percentage a value of 3.76, this being subjected to the operation of the
launched undergoes change of its modulus of fineness of 2.87, a value less than
the aggregate of origin. These are detailed in the Results Chapter.
The complex mechanized support of tunnels, due to the completeness and
combinations of its other elements such as Operational, Productive and
Engineering Controls, it was equally important to examine these same elements
simultaneously, to pretend the full knowledge and are detailed in the development
of this thesis.
Among the relevant topics addressed are the Operator's launch technique, the
autonomous robotic equipment for supplying pressurized air and the sets of the
technical procedures for quality control of the Shotcrete, from the previous
laboratory tests of its component materials, as well as his test in fresh state and
hardened state of the Shotcrete.
In the preparation of this, followed the recommendations, normative documents
of practices and international methods of construction of underground spaces,
European, American and Australian Standards; EN, EFNARC, ACI, ASA and
ASTM.
Colecciones
- Ingeniería Civil [1084]