Efectos de residuos de bronce, como sustitución del agregado fino, en las propiedades del concreto
View/ Open
Download
(application/pdf: 5.473Mb)
(application/pdf: 5.473Mb)
Date
2020Author(s)
Alva Cabellos, Estuardo Abrahan
Varela Bolaños, Brayan Randy
Metadata
Show full item recordAbstract
El presente trabajo de investigación tuvo como objetivo principal determinar los
efectos de residuos de bronce, como sustitución del agregado fino, en las
propiedades del concreto fresco y endurecido. El residuo de bronce utilizado fue
aquel producido en la fabricación de llaves que se obtuvo de algunas personas que
realizan el oficio en el distrito de Trujillo; en la búsqueda de poder utilizar este
material dentro del concreto, como parte del sector construcción que viene
creciendo este año, y encontrarle algún beneficio técnico que pueda contribuir a
proponer otros usos de este residuo y así contribuir al cuidado del medio ambiente.
Para cumplir con nuestro objetivo, se realizaron diseños de mezclas de concreto en
base a un concreto patrón siguiendo la metodología del ACI 211.1 para concretos
de resistencias f´c= 210 y 280 kg/cm2
. Se elaboraron probetas de 100 x 200 mm,
unas para concreto patrón (diseño normal) y otras probetas donde se sustituyó el
agregado fino por porcentajes de residuos de bronce (5, 10 y 15%
respectivamente), considerando una consistencia plástica de 3”- 4”.
Los datos obtenidos en el ensayo de la resistencia a la compresión con las
probetas, se analizaron estadísticamente y se determinó que la sustitución por
residuos de bronce en reemplazo del agregado fino en la conformación del
concreto, hace que este disminuya su resistencia en un rango de porcentaje de 7
al 10% de su resistencia a la compresión conforme se incremente esta adicción.
Este residuo de bronce (adición mineral) al hacer contacto químicamente con el
hidróxido de calcio del cemento, contribuye al disminuir la resistencia a la
compresión; sin embargo, se han comprobado que mantiene la trabajabilidad. The main objective of this research work was to determine the effects of bronze
residues, as a substitute for fine aggregate, on the properties of fresh and hardened
concrete. The bronze residue used was that produced in the manufacture of keys
that was obtained from some people who perform the trade in the Trujillo district; in
the search to be able to use this material within concrete, as part of the construction
sector that has been growing this year, and to find some technical benefit that may
contribute to proposing other uses of this waste and thus contribute to the care of
the environment.
To meet our objective, concrete mix designs were made based on a standard
concrete following the ACI 211 methodology for concrete with resistance f´c = 210
and 280 kg / cm2. Specimens of 100 x 200 mm were made, some for standard
concrete (normal design) and other specimens where the fine aggregate was
replaced by percentages of bronze residues (5, 10 and 15% respectively),
considering a plastic consistency of 3 ““- 4““.
The data obtained in the compression resistance test with the specimens, were
statistically analyzed and it was determined that the substitution by bronze residues
in replacement of the fine aggregate in the formation of the concrete, causes it to
decrease its resistance in a range of percentage of 5 to 10% of its compressive
strength as this addition increases. This bronze residue (mineral addition) when
chemically contacting the calcium hydroxide of the cement, contributes by reducing
the compressive strength; however, they have been found to maintain workability.
Subject
Collections
- Ingeniería Civil [1085]