dc.contributor.advisor | Medina Carbajal, Lucio Sigifredo | |
dc.contributor.author | Max Lopez, Eddy Fernando Manuel | |
dc.contributor.author | Ramos Marquina, Luis Jeffrey | |
dc.creator | Max Lopez, Eddy Fernando Manuel | |
dc.date.accessioned | 2023-11-22T19:59:18Z | |
dc.date.available | 2023-11-22T19:59:18Z | |
dc.date.issued | 2023 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12759/11732 | |
dc.description.abstract | La presente tesis trata sobre la influencia del PET reciclado en las
propiedades físico – mecánicas de adoquines. Tomando como objetivo, determinar
la influencia en las propiedades físico – mecánicas de adoquines elaborados con
PET reciclado al 4% y 8%. Proponiendo este plástico como agregado.
La metodología de la investigación es aplicada y experimental, mediante la
cual se evaluó las propiedades físico – mecánicas, bajo las normativas de la norma
técnica peruana NTP 399.611, el Manual de Ensayo de Materiales RD N° 18 – 2016
– MTC/14 y la Norma ACI 211.
Referenciando las normas del Manual de ensayos de materiales, se realizó
la caracterización de los agregados, donde se obtuvieron los valores de 0.31% de
humedad natural en la piedra y 0.96% en arena; dando como 3/4““ el TNM y 2.40 el
módulo de finura. También se realizó el peso unitario suelto y compactado para la
piedra, siendo 1364 kg/m3 y 1665 kg/m3
, mientras que la arena 1522 kg/m3 y 1797
kg/m3
respectivamente; finalizando por el peso específico y porcentaje de absorción
de la piedra, siendo de 2.46 y 1.04%, mientras que la arena 2.82 y 2.21%. Habiendo
realizado la caracterización de agregados, se realizó el diseño de mezcla según el
ACI 211 donde se obtuvo a/c = 0.45.
Seleccionamos especímenes prismáticos de 20cmx10cmx6cm para la
realización de todos los ensayos, resistencia a la compresión, según NTP 399.064;
resistencia a la flexión, según la NTG 41087 y Ensayo de porcentaje de absorción,
según ASTM C 140. Considerando que todos los adoquines superan f’c = 320
kg/cm2
, cumpliendo con lo estipulado en la NTP 399.611.
Por último, evaluamos los resultados mediante tablas y gráficos
comparativos de los valores a compresión, flexión y absorción de todos los
especímenes (patrón, patrón + 4% y patrón + 8% de PET reciclado) ensayados a
los 7, 14 y 28 días. Tomando como referencia el adoquín patrón para los ensayos
de resistencia a la flexión | es_PE |
dc.description.abstract | This thesis deals with the influence of recycled PET on the physical mechanical properties of paving stones. Taking as objective to determine the
influence on the physical-mechanical properties of pavers made with recycled PET
at 4% and 8%. Proposing this plastic as an aggregate.
The methodology of the research is applied and experimental, through which
the physical-mechanical properties were evaluated, under the regulations of the
Peruvian technical standard NTP 399.611, the Materials Testing Manual RD N° 18
– 2016 – MTC / 14 and the ACI 211 Standard.
Referencing the standards of the Material Testing Manual, the
characterization of the aggregates was carried out, where the values of 0.31% of
natural humidity in the stone and 0.96% in sand were obtained; giving as 3/4““ the
TNM and 2.40 the fineness modulus. The loose and compacted unit weight for the
stone was also made, being 1364 kg / m3 and 1665 kg / m3, while the sand 1522
kg / m3 and 1797 kg / m3 respectively; ending by the specific weight and percentage
of absorption of the stone, being 2.46 and 1.04%, while the sand 2.82 and 2.21%.
Having performed the characterization of aggregates, the mixture design was
carried out according to ACI 211 where a / c = 0.45 was obtained.
We selected prismatic specimens of 20cmx10cmx6cm for the performance
of all tests, compressive strength, according to NTP 399,064; flexural strength,
according to NTG 41087 and Absorption percentage test, according to ASTM C 140.
Considering that all pavers exceed f'c = 320 kg / cm2, complying with the provisions
of NTP 399.611.
Finally, we evaluated the results through comparative tables and graphs of
the compression, bending and absorption values of all specimens (pattern, pattern
+ 4% and pattern + 8% recycled PET) tested at 7, 14 and 28 days. Taking as
reference the standard paving stone for flexural strength tests | es_PE |
dc.description.uri | Tesis | es_PE |
dc.format | application/pdf | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Privada Antenor Orrego | es_PE |
dc.relation.ispartofseries | T_CIVIL_2351 | |
dc.rights | info:eu-repo/semantics/openAccess | es_PE |
dc.rights.uri | https://creativecommons.org/licenses/by/4.0/ | es_PE |
dc.source | Universidad Privada Antenor Orrego | es_PE |
dc.source | Repositorio Institucional | es_PE |
dc.subject | Adoquín | es_PE |
dc.subject | PET reciclado | es_PE |
dc.subject | Propiedades físico – mecánicas | es_PE |
dc.title | Influencia del PET reciclado en las propiedades físico-mecánicas de adoquines elaborados con agregados de la cantera Río Bado de Huamachuco | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
thesis.degree.grantor | Universidad Privada Antenor Orrego. Facultad de Ingeniería | es_PE |
thesis.degree.name | Ingeniero Civil | es_PE |
thesis.degree.discipline | Ingeniería Civil | es_PE |
dc.subject.ocde | http://purl.org/pe-repo/ocde/ford#2.01.00 | es_PE |
renati.advisor.orcid | https://orcid.org/0000-0001-5207-4421 | es_PE |
renati.author.dni | 73330951 | |
renati.author.dni | 72737651 | |
renati.advisor.dni | 40534510 | |
renati.type | http://purl.org/pe-repo/renati/type#tesis | es_PE |
renati.level | http://purl.org/pe-repo/renati/level#tituloProfesional | es_PE |
renati.discipline | 732016 | es_PE |
renati.juror | Henríquez Ulloa, Juan Paul Edwar | |
renati.juror | Gálvez Paredes, José Alcides | |
renati.juror | Merino Martínez, Marcelo Edmundo | |
dc.publisher.country | PE | es_PE |