Sistema de gestión de seguridad y salud ocupacional basado en la norma ISO 45001 para reducir los riesgos laborales en la empresa B & P Service
![Thumbnail](/bitstream/handle/20.500.12759/6927/REP_ING.IND_EDU.CARPIO_JORGE.DELGADO_SISTEMA.GESTION.SEGURIDAD.SALUD.OCUPACIONAL.BASADO.NORMA.ISO.45001%3a2018.REDUCIR.RIESGOS.LABORALES.EMPRESA.B%26P.SERVICE.pdf.jpg?sequence=4&isAllowed=y)
Ver/
Descargar
(application/pdf: 3.730Mb)
(application/pdf: 3.730Mb)
Fecha
2020Autor(es)
Carpio Villacorta, Edu Steven
Delgado Alberca, Jorge Armando
Metadatos
Mostrar el registro completo del ítemResumen
El presente trabajo de investigación tiene como objetivo proponer un modelo de
sistema de seguridad y salud en el trabajo en base a la Norma ISO 45001:2018 que
permita reducir los riesgos laborales en la empresa B & P SERVICE SAC; a través
del cumplimiento de los lineamientos establecidos por dicho estándar internacional.
La presente investigación inicia con un análisis de tendencia de los accidentes
laborales ocurridos entre los años 2016-2019 (datos brindados por la empresa), los
resultados fueron que para el 2020 los accidentes tendrán un aumento de 14.7%.
Esto nos demuestra que, si no se toma las acciones preventivas necesarias en
cuanto al tema de seguridad y salud en el trabajo, año a año los accidentes
laborales dentro de la empresa B&P Service SAC irán en aumento.
Para lograr el cumplimiento del primer objetivo, se realizó un diagnóstico de la
situación actual de la empresa; en el que se detectaron las no conformidades en
relación al deficiente SGSSO con un promedio de cumplimiento del 13%,
permitiendo elaborar una propuesta que fortalezca el cumplimiento de los requisitos
de la norma ISO 45001:2015 para poder prevenir las lesiones y deterioro de la salud
a los trabajadores que se pueden suscitar en su jornada laboral; proporcionando
lugares de trabajo seguros y saludables; logrando una reducción esperado de los
riesgos de intolerables o importantes a moderados o triviales; por lo que estaría en
un nivel regular, quedando en manos de la empresa mejorarlo.
Una vez analizada la situación actual en tema de SGSSO en el taller, con ayuda de
la matriz IPERC se procedió a realizar la identificación y medición de las variables
de riesgo, los resultados obtenidos fueron que el 49 % de los accidentes son
importantes, 49% son moderados y el 2 % son tolerables.
La identificación de las áreas más críticas de la empresa, se realizó para tomar las
acciones necesarias y mitigar la ocurrencia de accidentes, para ello se utilizó el
diagrama de Pareto, con la base datos de los accidentes ocurridos; las actividades
críticas identificadas fueron las perteneciente a las áreas de planchado y mecánica.
La identificación de estas nos derivó a desarrollar diferentes manuales de seguridad
adecuados para las actividades críticas mencionadas anteriormente.
vi
Teniendo el consolidado de los accidentes ocurridos en el 2019, se desarrolló un
listado con los accidentes más frecuentes tomando en consideración las
actividades más críticas, los tipos y niveles de riesgos, para poder desarrollar el
modelo de causalidad de Frank E. Bird JR., en el 80 % de los accidentes ocurridos,
con este análisis obtuvimos como resultado conocer cuáles son las deficiencias
tanto de los trabajadores como del entorno en el que laboran.
Para complementar lo realizado anteriormente se desarrolló el diagrama de
Ishikawa para analizar la causa de los accidentes, utilizar el diagrama nos ayudó a
visualizar mejor todas las causas que influyen para que se ocasionen accidentes
laborales dentro del taller.
Obteniendo todos los conocimientos necesarios se procedió a desarrollar la
DISEÑO DEL SISTEMA DE GESTIÓN DE SEGURIDAD Y SALUD EN EL
OCUPACIONAL BASADO EN LA NORMA ISO 45001-2018.
Finalmente se obtuvo un VAN de S/. 29 223.07, la TIR de 98% y B/C de 1.64 por
consiguiente el proyecto es viable para su implementación. The objective of this research work is to propose a model of a health and safety
system at work based on the ISO 45001: 2018 Standard that allows reducing
occupational risks in the company B & P SERVICE SAC; through compliance with
the guidelines established by said international standard.
This research begins with a trend analysis of workplace accidents that occurred
between 2016-2019 (data provided by the company), the results were that by 2020
accidents will have an increase of 14.7%. This shows us that, if the necessary
preventive actions are not taken regarding the issue of safety and health at work,
year after year work accidents within the company B&P Service SAC will increase.
To achieve the first objective, a diagnosis of the current situation of the company
was carried out; in which non-conformities were detected in relation to the deficient
SGSSO with an average compliance of 13%, allowing the elaboration of a proposal
that strengthens compliance with the requirements of the ISO 45001: 2015 standard
in order to prevent injuries and deterioration of health to the workers that can be
raised in their working hours; providing safe and healthy workplaces; achieving an
expected reduction in risks from intolerable or significant to moderate or trivial; so it
would be at a regular level, leaving it up to the company to improve it.
Once the current situation regarding SGSSO was analyzed in the workshop, with
the help of the IPERC matrix, the identification and measurement of risk variables
was carried out, the results obtained were that 49% of accidents are important, 49%
they are moderate and 2% are tolerable.
The identification of the most critical areas of the company was carried out to take
the necessary actions and mitigate the occurrence of accidents, for this the Pareto
diagram was used, with the database of the accidents that occurred; the critical
activities identified were those belonging to the ironing and mechanical areas. The
identification of these led us to develop different safety manuals suitable for the
critical activities mentioned above.
viii
Taking into account the consolidation of the accidents that occurred in 2019, a list
was developed with the most frequent accidents taking into consideration the most
critical activities, types and levels of risks, in order to develop the Frank E. Bird JR
causality model., In 80% of the accidents that occurred, with this analysis we
obtained the result of knowing which are the deficiencies of both the workers and
the environment in which they work.
To complement what has been done previously, the Ishikawa diagram was
developed to analyze the cause of accidents, using the diagram helped us to better
visualize all the causes that influence workplace accidents in the workshop.
Obtaining all the necessary knowledge, we proceeded to develop the DESIGN OF
THE SAFETY AND HEALTH MANAGEMENT SYSTEM IN THE OCCUPATIONAL
BASED ON THE ISO 45001-2018 STANDARD.
Finally, a NPV of S /. 29 223.07, the IRR of 98% and B / C of 1.64, therefore the
project is viable for its implementation
Palabras clave
Colecciones
- Ingeniería Industrial [370]