Características del concreto en estado fresco y endurecido elaborado con el agregado global roca cuarcita de la cantera el Inca y cemento portland tipo Ms e ico del centro poblado santa clara de tulpo - Santiago de Chuco
![Thumbnail](/bitstream/handle/20.500.12759/7020/REP_DARWIN.AVILA_LUIS.JIMENEZ_CARACTERISTICAS.DEL.CONCRETO.pdf.jpg?sequence=4&isAllowed=y)
Ver/
Descargar
(application/pdf: 5.912Mb)
(application/pdf: 5.912Mb)
Fecha
2020Autor(es)
Ávila Vera, Darwin Hebert
Jiménez Vásquez, Luis Eduardo
Metadatos
Mostrar el registro completo del ítemResumen
La presente investigación denominado “Características del concreto en estado fresco y endurecido
elaborado con el agregado global “roca cuarcita” y cemento portland tipo “Ms e Ico”, se encuentra
ubicado en la ciudad, distrito, provincia y departamento de La libertad, en nuestro ámbito debido
al crecimiento que se viene mostrando existen nuevas construcciones tanto en edificaciones y
obras civiles de diferente tipo, entonces con el deseo de crecer como país, la construcción permite
gestar un desarrollo en diferentes aéreas de la ingeniería civil, consiguientemente no es algo raro
que en el campo de la tecnología del concreto encontremos nuevas soluciones que faciliten una
mejor calidad en la elaboración de concreto ya que se emplea mucho en las obras civiles por lo
cual nuestra investigación tiene como finalidad disponer de las características del concreto en su
estado fresco y endurecido elaborado con agregado global ´´roca cuarcita´´ empleando cemento
portland tipo Ms e Ico.
Por otro lado, para determinar el diseño de mezcla se tomó en cuenta las principales características
del agregado global: Porcentaje de humedad, porcentaje de absorción, densidad de masa,
granulometría, módulo de finura y peso unitario suelto.
Así mismo se confeccionaron un total de 40 probetas cilíndricas (15cm de diámetro y 30cm de
altura); con las siguiente relación inversa agua cemento de: 0.40, 0.45, 0.50 y 0.55 para un de
Asentamiento de (3 - 4)”, de los cuales 16 testigos fueron ensayados a los 14 días y los 24 restantes
a edad de 28 días, siguiendo los criterios técnicos de la norma ASTM y NTP.
Como consecuencia de nuestra investigación logramos proyectar un esquema con dos curvas de
relación agua cemento y resistencia a la comprensión del concreto (a/c Vs F’c), una curva para
el cemento portland tipo Ms y la otra para el tipo Ico, por lo consiguiente el agua es el que
determina la característica del concreto en estado fresco (Asentamiento), y la relación (a/c), nos
brinda la característica del concreto en estado endurecido (F’c), expresamos entonces que estas
curvas serán de gran ayudad para los habitantes del distrito de Mollebamba, Santiago de chuco,
La Libertad; para que puedan elaborar sus diseños de mezcla de concreto con Agregado Global
(roca cuarcita) partiendo de los datos obtenidos en esta investigación. The present investigation called ““Characteristics of concrete in fresh and hardened state made
with the global aggregate““ quartzite rock ““and portland cement type““ Ms and Ico ““, is located in
the city, district, province and department of La Libertad, in our Due to the growth that has been
shown, there are new constructions both in buildings and civil works of different types, so with
the desire to grow as a country, construction allows a development in different areas of civil
engineering to be generated, then it is not something strange that In the field of concrete
technology, let us find new solutions that facilitate a better quality in the preparation of concrete,
since it is widely used in civil works, therefore our research aims to have the characteristics of
concrete in its fresh and durable state made with global aggregate ´´quarzite rock´´ using portland
cement type Ms and Ico.
On the other hand, to determine the mix design, the main characteristics of the global aggregate
were taken into account: moisture percentage, absorption percentage, mass density, granulometry,
fineness modulus and loose unit weight.
Likewise, a total of 40 cylindrical test tubes (15cm in diameter and 30cm in height) were made;
with the following inverse water-cement relationship of: 0.40, 0.45, 0.50 and 0.55 for a Settlement
of (3 - 4) ”, of which 16 controls were tested at 14 days and the remaining 24 at 28 days, following
the technical criteria of the ASTM and NTP standards.
As a consequence of our research, we were able to project a scheme with two curves of watercement ratio and resistance to concrete compression (a / c Vs F'c), one curve for portland cement
type Ms and the other for type Ico, for Consequently, the water is what determines the
characteristic of the concrete in the fresh state (Settlement), and the relationship (a / c) gives us
the characteristic of the concrete in the hardened state (F'c), we then express that these curves will
be of great help for the inhabitants of the district of Mollebamba, Santiago de chuco, La Libertad;
so that they can develop their concrete mix designs with Global Aggregate (quartzite rock) based
on the data obtained in this research.
Colecciones
- Ingeniería Civil [1374]