Influencia del PET reciclado en las propiedades físico-mecánicas de adoquines elaborados con agregados de la cantera Río Bado de Huamachuco
![Thumbnail](/bitstream/handle/20.500.12759/11732/REP_EDDY.MAX_LUIS.RAMOS_INFLUENCIA.DEL.PET.pdf.jpg?sequence=7&isAllowed=y)
Date
2023Author(s)
Max Lopez, Eddy Fernando Manuel
Ramos Marquina, Luis Jeffrey
Metadata
Show full item recordAbstract
La presente tesis trata sobre la influencia del PET reciclado en las
propiedades físico – mecánicas de adoquines. Tomando como objetivo, determinar
la influencia en las propiedades físico – mecánicas de adoquines elaborados con
PET reciclado al 4% y 8%. Proponiendo este plástico como agregado.
La metodología de la investigación es aplicada y experimental, mediante la
cual se evaluó las propiedades físico – mecánicas, bajo las normativas de la norma
técnica peruana NTP 399.611, el Manual de Ensayo de Materiales RD N° 18 – 2016
– MTC/14 y la Norma ACI 211.
Referenciando las normas del Manual de ensayos de materiales, se realizó
la caracterización de los agregados, donde se obtuvieron los valores de 0.31% de
humedad natural en la piedra y 0.96% en arena; dando como 3/4““ el TNM y 2.40 el
módulo de finura. También se realizó el peso unitario suelto y compactado para la
piedra, siendo 1364 kg/m3 y 1665 kg/m3
, mientras que la arena 1522 kg/m3 y 1797
kg/m3
respectivamente; finalizando por el peso específico y porcentaje de absorción
de la piedra, siendo de 2.46 y 1.04%, mientras que la arena 2.82 y 2.21%. Habiendo
realizado la caracterización de agregados, se realizó el diseño de mezcla según el
ACI 211 donde se obtuvo a/c = 0.45.
Seleccionamos especímenes prismáticos de 20cmx10cmx6cm para la
realización de todos los ensayos, resistencia a la compresión, según NTP 399.064;
resistencia a la flexión, según la NTG 41087 y Ensayo de porcentaje de absorción,
según ASTM C 140. Considerando que todos los adoquines superan f’c = 320
kg/cm2
, cumpliendo con lo estipulado en la NTP 399.611.
Por último, evaluamos los resultados mediante tablas y gráficos
comparativos de los valores a compresión, flexión y absorción de todos los
especímenes (patrón, patrón + 4% y patrón + 8% de PET reciclado) ensayados a
los 7, 14 y 28 días. Tomando como referencia el adoquín patrón para los ensayos
de resistencia a la flexión This thesis deals with the influence of recycled PET on the physical mechanical properties of paving stones. Taking as objective to determine the
influence on the physical-mechanical properties of pavers made with recycled PET
at 4% and 8%. Proposing this plastic as an aggregate.
The methodology of the research is applied and experimental, through which
the physical-mechanical properties were evaluated, under the regulations of the
Peruvian technical standard NTP 399.611, the Materials Testing Manual RD N° 18
– 2016 – MTC / 14 and the ACI 211 Standard.
Referencing the standards of the Material Testing Manual, the
characterization of the aggregates was carried out, where the values of 0.31% of
natural humidity in the stone and 0.96% in sand were obtained; giving as 3/4““ the
TNM and 2.40 the fineness modulus. The loose and compacted unit weight for the
stone was also made, being 1364 kg / m3 and 1665 kg / m3, while the sand 1522
kg / m3 and 1797 kg / m3 respectively; ending by the specific weight and percentage
of absorption of the stone, being 2.46 and 1.04%, while the sand 2.82 and 2.21%.
Having performed the characterization of aggregates, the mixture design was
carried out according to ACI 211 where a / c = 0.45 was obtained.
We selected prismatic specimens of 20cmx10cmx6cm for the performance
of all tests, compressive strength, according to NTP 399,064; flexural strength,
according to NTG 41087 and Absorption percentage test, according to ASTM C 140.
Considering that all pavers exceed f'c = 320 kg / cm2, complying with the provisions
of NTP 399.611.
Finally, we evaluated the results through comparative tables and graphs of
the compression, bending and absorption values of all specimens (pattern, pattern
+ 4% and pattern + 8% recycled PET) tested at 7, 14 and 28 days. Taking as
reference the standard paving stone for flexural strength tests
Collections
- Ingeniería Civil [1149]